2002-03 Hummer Mixed Startle Instructions
1. Playground a car upon prosa ic turn belligerent. Set a puncture stop as well as scrupulously retard a tires.
2. Lift a front of a car as well as await a support rails regulating jack stands. M islay a front tires.
3. Mislay a bushing as wel l as washer fr om a top apportionment of a bureau startle. Place a brandnew top support joint over a bureau joint. (See Print #1). Rightaway reinstall a top bushing as well as washer onto a bureau shock.
4. Pull a joint up washout opposite a support. A outward ascent hole upon a tip image will rightaway line up with a bureau hole in a top mountain. Cavalcade out a bureau ho le regulating the 13/32” cavalcade bit. Implement a 3/8 x 1 excellent thread shaft with washers as well as locknut during this place. (See Print #2).
5. Symbol asingle of a outdoor holes upon a front as well as back of a joint where it mounts to a support. Alittle models will line up wi th 1 bureau hole in a support. It is endorsed to cavalcade as well as implement a front shaft initial afterwards pierce to a back mountain. Cavalcade regulating the 5/16” cavalcade bit. Once drilled, implement a 3/8 x 1” thread knife shaft. Once 1 shaft has been commissioned upo n a front as well as back, cavalcade a superfluous outdoor holes as well as implement a 3/8” bolts.
6. With all of a outdoor bolts commissioned. Symbol as well as cavalcade a core hole regulating the 1/2” cava lcade bit. Be certain not to cavalcade into any energy steering lines or electricwires. It will be required upon alittl e models to mislay a bureau empty feverishness defense from a backside of a sup port to concede for designation. Once commissioned, reinstall a feverishness defense. Once drilled, implement a 1/2 x 4” excellent thread bolts wi th washers as well as nuts. Be certain to implement a shaft from inside indicati ng out. (See Print #4). A brandnew brakeline joint wi ll insert underneath a bottom shaft in a front mountain. Insert a bureau brakeline joint to a prolongation joint regulating a 5/16 x 1” excellent thread shaft, washers, as well as locknut.
7. Implement a brandnew reduce joint upon tip of a bureau top A-Arm. A dual outward bolts will line up with bureau holes in a top A-Arm. Insert a joint during these points regulating the
6 x 30mm bolts as well as washers. With a outdoor bo lts commissioned, symbol as well as cavalcade a dual middle holes regulating the 13/32” cavalcade bit. Onc e drilled implement bottom image upon a bottom of top A-Arm. Inser t to top joi nt regulating a 3/8 x 2 3/4” bolts, washers, as well as close nuts. (See Print #6).
8. With all brackets commissioned, implement a brandnew shocks regulating a 1/2 x 3” excellent thread bolts, washers, as well as nuts.
9. After designation, reinstall front tires as well as reduce car onto a belligerent. Cycle a steering left to right as well as check tires as well as wheels for clearance.
Get pdf 2002-03 Hu mmer Mixed Startle Instructions
