2003-2006 Hummer H2 6.0L V8 Partial #3060 Designation Instructions
1. Start by unplugging a MAF sensor by regulating the screw motorist to mislay a shave as shown.
2. Pull wise in as well as lift up to mislay a handle strap from a MAF sensor.
3. Mislay a bolts which reason a batch air box in place as shown as well as set in reserve for reuse with a MAC complement.
4. Unbolt the engine cover by regulating a 10mm hollow as shown as well as set a hardware in reserve for reuse.
5. Mislay a cover to gain entrance to a hose clamp during a stifle physique as shown.
6. Disencumber a hose clamp upon the batch air bloodvessel which attaches during a stifle physique as shown.
7. Disencumber a hose clamp which attaches a batch air bloodvessel to a MAF sensor as shown.
8. Mislay a batch air bloodvessel from a stifle physique as well as a MAF sensor as shown.
9. Disencumber a hose clamp around the MAF meter as well as mislay the scale form a air box. Note: A MAF scale will be reused with a MAC complement.
10. Mislay a batch air box by pulling it out of a buffer as shown.
11. Implement the MAC quickness adaptor upon to a MAC air dam with a O-ring granted in a hardware pack.
12. Implement the MAF scale to a quickness adaptor by a MAC air dam as shown. Note: Do not over tie a mass air scale.
13. Implement a MAC air dam into a batch place as shown. Makeuseof a batch hardware to mountain a air dam in place.
14. Mislay a air scale from a batch air bloodvessel and implement it to a MAC air bloodvessel as shown. Additionally implement a silicone hoses to a MAC air bloodvessel.
15. Implement a MAC air bloodvessel to a stifle physique as well as to a mass air scale as shown regulating a silicone hoses supposing in a pack as well as tie a hose clamps. Note: Do not over tighten a hose clamps.
Get pdf 2003-2006 Hummer H2 6.0L V8 Partial #3060 Designation Instructions
