Hummer H3 Back Stabilizer Club Designation Instructions
THIS ANTI-SWAY BAR IS DESIGNED TO REPLACE A FACTORY INSTALLED REAR LEAN BAR AS WELL AS UPGRADE A FRONT SWAY CLU B BUSHINGS.
1. Mislay a factory installed rear anti-sway bar from bureau mounts as well as finish links.
2. Lubricate a D-shaped poly bushings as well as install upon the sway club in approximately a same location as the bureau mounts. To ease installation of bushing, make use of coined finish of lean bar to spread bushing during separate and slide bushing onto bar. Install using supplied U-plates and serrated flange bolts. LEAVE LOOSE AT THIS TIME . Attach the factory finish link assemblies using factory granted nuts. Torque all mounting hardware as well as finish links to factory specifications.
3. Mislay the factory installed D-shaped bushings as well as U-plates from the FRONT SWAY BAR. Lubricate the brandnew D-shaped poly bushing as well as install them on the bureau lean bar using supplied U-plates and serrated flange bolts. Torque bolts to a bureau specifications.
4. Recheck your designation on a regular basis afterward.
Get pdf Hummer H3 Rear Stabilizer Bar Designation Instructions
