Ford Gemini Identicaltiwn Image Systems Electronic Fuel Injected Instructions
You have chosen the finest nitrous system ever. Nitrous Demonstrate utilizes only the top peculiarity components designed for a make use of of liquid nitrous oxide. To properly implement these specially written components as well as obtain a trouble-free operation that this system is capable of producing, it is intensely important which you read all instructions carefully. Compensate special attention to the critical records at the finish of the installation stairs and the tuning tips listed at a behind of this instruction sheet.
NOTE: All NX EFI Gemini Identicaltiwn Systems come with dual theatre mist bars pre-installed at a factory. To up-grade your standard single stage system hit your local NX play as well as ask for PN NX200DS.
The NX GeminiTwin EFI system is designed to work with batch fuel pumps as well as no timing retards up to the 150 horsepower setting. Upon all settings above 150 horsepower a following precautions should be observed:
A. An extra genius aftermarket fuel siphon contingency be used. 250LPM Smallest
B. Tall octane competition type fuel contingency be used to forestall eruption.
C. Increasing strength inner engine components and high performance conduct gaskets may be required.
D. Depending on compression as well as fuel peculiarity timing retard may be required to prevent detonation. If you have an aftermarket ECU chip that advances the stock timing, eruption could be a problem. These chips can still be retained if aloft octane fuel or NX Energy Upholder (PN # 16000) fuel additive is used. On Dual Theatre systems an aftermarket, high capacity fuel siphon contingency be installed. Depending upon your combination and turn of nitrous boost, timing retard may also be required.
To insure proper system assembly and operation, carefully review a following designation procedures entirely before beginning. Use NX thread sealer on all siren thread connections, DO NOT use any sealer upon light connectors, hose, or bottle connections. Use no other sealing compounds or Teflon tape. All threads contingency be clean and dry, request only enough sealer to soppy the threads, aswell little is better than too most. Extreme tightening of parts is not required, snug is enough. If it is necessary to remove a wise commissioned with a red NX sealer feverishness must be applied to release a sealing representative.
NOTE: Due to shipping restrictions all NX nitrous bottles arrive dull. Before commencement a installation a N2O bottle should be filled by the NX accredited stuffing station. For stuffing station locations record on to www.nitrousexpress.com
Before starting any installation procedures delicately undo a vehicle disastrous battery cable. If there is any subject about this operation consult a vehicle owners manual.
