2009-2010 Hyundai Multi Car Mountain MVM-35-05 Designation Primer
The Multi Vehicle Mount is an Finish user-installer) modifiable veteran ascent bracket for many all mobile wiring requiring a steady and secure designation in a engine vehicle. The MVM installs at the back of your vehicles dash panel using existing or non-visible holes and is designed to cleanly protrude out from your vehicle’s dash row. Prior to installing, you must take the time to review as well as understand this designation primer as well as read all the warnings accompanying this product.
Instructions Embody: tools needed for install, directions for lurch panel removal, directions for modifying the MVM if required.
Dash Disassembly Instructions:
– With a dash trim dismissal tool, carefully examine up on the shifter bezel. Request the parking brake and change he automobile into neutral and pierce the shifter bezel back.
– Carefully pry out as well as mislay the 2 straight panels to a l eft and right of the core pocket. Mislay (2) 8mm screws land the trim pannel on top of a pocket in as well as mislay trim pannel.
– With the dash trim dismissal tool carefully pry out as well as mislay the heater controll/ radio bezel. Remove (4) 8mm screws holding a radio in as well as remove the radio.
– Place the MVM upon the dash as shown and secure with the supplied phillips screws.
– Delicately reinstall the lurch in retreat sequence securing all screws and clips to the bezel. Install the included Ultra Slim Pivot #PHS-203 to your Multi Vehicle Mountain or any alternative AMPs compatible device.
– Your installation is complete
