Jeep Autocracy 2? Curl Open Lift Spacer Designation Instructions
Get ready to install front coil open lifts.
1. Under the metalcover motorist side.
a. Mislay bolt (4), battery hold down (5), and battery (3) from battery tray (6) and car. b. Mislay dual bolts (7), pap (8), as well as battery tray (6) from middle fender (9). Do not disconnect battery tray from wiring strap (10).
c. Mislay opening line (11) from bulb (12).
2. Under the metalcover passenger side.
the. Mislay 4 clips (13), clamp (14), and air box cover (15) from air channel (16) as well as air box (17).
b. Remove air filter (18) from air box (17) as well as vehicle.
c. Remove 3 nipples (8) and air box (17) from middle fender (9) as well as vehicle
3. Lift front of car.
a. Disencumber five lug nuts (19) each from dual front wheels (20).
b. Regulating the hydraulic jack, slowly lift front of vehicle so which dual front tires (21) are three to five inches off of belligerent. Onallsides dual jack stands under physique (22) in the factory endorsed light positions. Lower body onto jack stands. Remove hydraulic jack from car framework.
c. Mislay five projection nuts (19) any as well as two front wheels (20) from spindle (23).
4. Remove front axle newcomer side hardware.
the. Posit ion hydraulic jack underneath lower A-arm (24) and apply pressure. Do not lift.
b. Mislay nut (25), bolt (26), and shaft keeper (27) from strut flare (28) as well as lower A-arm (24).
c. Remove bolt (29) and strut fork (28) from strut public (30).
