17.0L Hino Diesel Engine Parts Manual
500 KW TO 2000 KW STANDBY DIESEL ENGINE DRIVEN GENERATOROFELECTRICPOWER SETS
Following is the endorsed upkeep Inform for Generac standby diesel engine driven generator sets from 500 kW to 2000 kW in size. The established intervals in the Inform have been a limit recommended when the section is used in an normal service application. They will need to be decreased (performed some-more frequently) if a section is used in the serious application. Use a unit hour scale or monthly calendar time, yesorno occurs initial, from a prior maintenance interval to determine the subsequent compulsory upkeep interval.
Service Maintenance Interval Information:
The assorted use upkeep intervals are designated by interlude numbers as follows:
1 An early investigation of the generatorofelectricpower set to protection it is ready to operate when compulsory and to identify any potential complaint areas. Performed monthly or following any 10 hours of operation of the unit as well as requires about .5 man-hours per section to finish.
This investigation may be performed by a end user onconditionthat the following reserve stairs are taken to prevent a engine from starting automatically without notice:
To prevent damage, perform a following stairs in the sequence indicated before starting any maintenance:
• Disable a generatorofelectricpower set from starting and/or joining to a load by setting the control panel Auto-Off-Manual switch to a “OFF” onallsides.
• Remove the control row compound.
• Turn off a battery charger.
• Remove a disastrous battery cable.
The battery horse contingency be turned off BEFORE stealing a battery cable to prevent an over current condition from blazing out sensitive control row components as well as circuits. Following all upkeep, reverse these steps to insure a unit is returned to standby setup for normal operation when required.
