Aries Ford F450-F550 Parts Service Manual
Placement of Vehicle upon Rail
1. Find a befitting road crossing to position the car on rail. If required set up cautionary inclination to safeguard reserve.
2. Position the car with the road circle tires on the rails, and the rail circle flanges positioned centrally above a railhead. Backing into place is customarily simpler.
3. Put a vehicle’s delivery into playground or neutral. Set a parking stop.
4. Engage the PTO hydraulic siphon or start a auxiliary hydraulic energy source.
5. The back will be placed upon rail initial.
the. Raise a rail gear up the bit to relieve a vigor on the close hook.
b. Pull a T-handle for the lock to pitch a offshoot out of a way.
c. Lower the rail gear into position upon the rail.
d. Release the T-handle for the close.
6. Check a fixing of a front rail wheels with the lane – it competence be required to adjust a position of the vehicle.
7. The front rail rigging will right away be lowered.
the. Raise the rail gear up the bit to soothe a vigor upon the pin lock.
b. Remove the both pins from the top holes.
c. Lower the rail rigging.
d. Install the close pins in the lower holes.
8. Engage the steering close.
9. Drive the car brazen as well as back the couple of yards to check vehicle’s operation as well as brakes.
10. Vehicle is right away ready for rail transport.
Removal of Vehicle from Rail
1. Find a suitable road channel to mislay the car from the rail.
2. Put a vehicle’s transmission into playground or neutral. Set a parking stop.
3. Engage a PTO hydraulic pump or start the auxiliary hydraulic energy source.
4. The front will be raised initial.
a. Bump a rail rigging down a bit to relieve the pressure upon a lock pins.
b. Remove both pins from the lower holes.
c. Raise a rail gear into the highway place.
d. Insert a close pins into a top locking holes.
