This kit provides the SOLUTION for eliminating air conditioning and power steering on motors found in the 02-06 RSX, ITR and CTR while: -Relocating the alternator to avoid headlight material
TechArt Power kit TA 097/S1 for Porsche 997 facelift By Brian Potter November 12, 2009 3:07 AM Filed Under: German, Porsche , Tuners
As Porsche models evolve,
Installation 1. Slide two 5/16” dia x 1-1/8” wide U-bolts (C1) over the rear frame cross tubes as shown in figure 1. 2. Place the plow mount (A1) under the vehicle, and slide the
INSTALLATION 1. Before installing the TFI you must first disconnect the negative lead from the battery. 2. Determine a location for the TFI unit. Suggested locations are as follows: Under
Trucks with lift kits or leveling kits installed have a higher center of gravity. Aggressive direction changes may cause a tip over. Always drive carefully and obey the speed limit. 1. FRONT
Before servicing propeller, be sure the engine is in neutral with ignition off or disconnected to avoid any possibility of the engine starting and causing injury. Do not install any propeller
The KraftWerks Honda Fit Injector Upgrade kit is designed to be used in conjunction with the KraftWerks Fit Base Supercharger Systems. If you are a competent mechanic with a good set of tools, the
Installation 1. Slide four 5/16” dia x 1-1/4” wide U-bolts (C1) over the underside frame of the ATV. If unsure of their location, position the plow mount (A1) against the underside of the
This product is a great fit for stock bikes with exhaust and intake mods. It is also capable of handling the fuel needs of big bore kits, light cams, and a variety of head porting. This is an Electronic
Tools Recommended: metric deep socket set, metric and American open end wrench set, 9/64th Allen wrench, Teflon tape, wire cutters, terminal crimpers. Follow the included diagram exactly. This
